transcontinental railroad

Africa

East-west

There are several ways to cross Africa transcontinentally via connecting east–west railways. One is the Benguela railway, completed in 1929. It starts in Lobito, Angola, and connects through Katanga to the Zambia railways system. From Zambia several ports are accessible on the Indian Ocean: Dar es Salaam in Tanzania through the TAZARA, and, through Zimbabwe, Beira and Maputo in Mozambique. The Angolan Civil War made the Benguela line largely inoperative, but efforts are being taken to restore it. Another west–east corridor leads from the Atlantic harbours in Namibia, either Walvis Bay or Luderitz to the South African rail system that, in turn, links to ports on the Indian Ocean ( i.e. Durban, Maputo).

A 1015 km gap in the east–west line between Kinshasa and Ilebo is filled by riverboats. It could be plugged if a new railway were to be built, as was discussed in 2009.

There are two proposals for a line from the Red Sea to the Gulf of Guinea, including TransAfricaRail.

In 2010, a proposal sought to link Dakar to Port Sudan. Thirteen countries would be on the main route; another six would be served by branches.

North-south

A north-south transcontinental railway had been proposed by Cecil Rhodes, who termed it the Cape-Cairo railway. This system would act as a direct route from the northernmost British possession in Africa, Egypt, to the southernmost one, the Cape Colony. The project was never completed. During its development, a competing French colonial project for a competing line from Algiers or Dakar to Abidjan was abandoned after the Fashoda incident. This line would have had four gauge islands in three gauges.

An extension of Namibian Railways is being built in 2006 with the possible connection to Angolan Railways.

Libya has proposed a Trans-Saharan Railway connecting possibly to Nigeria which would connect with the proposed AfricaRail network.

African Union of Railways

The African Union of Railways has plans to connect the various railways of Africa including the Dakar-Port Sudan Railway.

Australia

East-west

Australia's east–west transcontinental rail corridor, consisting of lines built to three different track gauges, was completed in 1917, when the Trans-Australian Railway was opened between Port Augusta, South Australia and Kalgoorlie, Western Australia. This line, built by the federal government as a federation commitment, filled the last gap in the lines between the mainland state capitals of Brisbane, Sydney, Melbourne, Adelaide and Perth. Passengers and freight alike suffered from time-consuming breaks of gauge: a Perth–Brisbane journey at that time involved two standard gauge 1435 mm (4 ft 81⁄2 in) lines, a broad gauge 1600 mm (5 ft 3 in) line, and three of 1067 mm (3 ft 6 in) gauge.

In the 1940s and 1960s, steps were taken to progressively reduce the huge inefficiencies caused by the numerous historically imposed breaks of gauge by linking the mainland capital cities with lines all of standard gauge.

In 1970, the route across the continent was completed to standard gauge and a new, all-through passenger train, the Indian Pacific was inaugurated.

An east–west transcontinental line across northern Australia from the Pilbara to the east coast – more than 1000 km (600 mi) north of the Sydney-Perth rail corridor – was proposed in 2006 by Project Iron Boomerang to connect iron ore mining in the Pilbara and coal mining in the Bowen Basin in Queensland, with steel manufacturing plants at both ends.

North–south

Australia's north–south transcontinental rail corridor was built in stages during the 20th century, leaving a 1420-kilometre (880-mile) gap to be finished after the 828 kilometres (514 miles) Tarcoola to Alice Springs section was completed in 1980. That final section, from Alice Springs to Darwin, was opened in 2004. The total length of the corridor, from Adelaide to Darwin, is 2975 kilometres (1849 miles). Completion of the corridor ended 126 years of freight and passengers alike having to be transferred between trains on tracks of different gauges: the corridor is now entirely 1435 mm (4 ft 81⁄2 in) standard gauge. The corridor is an important route for freight. An upmarket experiential tourism passenger train, The Ghan, operated by Journey Beyond, makes the journey once a week in each direction from Adelaide to Darwin, and the company's east–west Indian Pacific runs on the southernmost 727 kilometres (452 miles) before heading west to Perth. There is no intermediate passenger traffic on the line.

In 2018, the Australian Rail Track Corporation started building a 1700-kilometre (1000-mile) standard gauge fast-freight railway from Melbourne to Brisbane, known as the Inland Railway. As of June 2022, completion was anticipated in 2027.

Eurasia

Europe

The first transcontinental railroad in Europe, that connected the North Sea or the English Channel with the Mediterranean Sea, was a series of lines that included the Paris–Marseille railway, in service 1856. Multiple railways north of Paris were in operation at that time, such as Paris–Lille railway and Paris–Le Havre railway.

The second connection between the seas of Northern Europe and the Mediterranean Sea, was a series of lines finalized in 1857 with the Austrian Southern Railway, Vienna–Trieste. There were before that railroad connections Hamburg–Berlin–Wrocław–Vienna (including Berlin–Hamburg Railway, Berlin–Wrocław railway, Upper Silesian Railway and Emperor Ferdinand Northern Railway). The Baltic Sea was also connected through the Lübeck–Lüneburg railway.

Trans-Eurasia

The Trans-Siberian Railway, completed in 1905, was the first network of railways connecting Europe and Asia. It connects Western Russia to the Russian Far East, and is the longest railway line in the world, with a length of over 9,289 kilometres (5,772 miles). The railway starts from Russia's capital Moscow, which is the largest city in Europe, and ends at Vladivostok, on the coast of the Pacific Ocean. Expansion of the railway system continues as of 2021, with connecting rails going into Asia, namely Mongolia, China and North Korea. There are also plans to connect Tokyo, the capital of Japan, to the railway.

A second rail line connects Istanbul in Turkey with China via Iran, Turkmenistan, Uzbekistan and Kazakhstan. This route imposes a break of gauge at the Iranian border with Turkmenistan and at the Chinese border. En route there is a train ferry in eastern Turkey across Lake Van. The European and Asian parts of Istanbul was linked 2019 linked by the Marmaray undersea tunnel, before that by train ferry. There is no through service of passenger trains on the entire line. A uniform gauge connection was proposed in 2006, commencing with new construction in Kazakhstan. A decision to make the internal railways of Afghanistan 1,435 mm (4 ft 8+1⁄2 in) gauge potentially opens up a new standard gauge route to China, since China abuts this country.

The Trans-Asian Railway is a project to link Singapore to Istanbul and is to a large degree complete with missing pieces primarily in Myanmar. The project has also linking corridors to China, the central Asian states, and Russia. This transcontinental line unfortunately uses a number of different gauges, 1,435 mm (4 ft 8+1⁄2 in), 1,676 mm (5 ft 6 in), 1,520 mm (4 ft 11+27⁄32 in) and 1,000 mm (3 ft 3+3⁄8 in), though this problem may be lessened with the use of variable gauge axle systems such as the SUW 2000.

The TransKazakhstan Trunk Railways project by Kazakhstan Temir Zholy will connect China and Europe with standard gauge 1,435 mm (4 ft 8+1⁄2 in). Construction is set to start in 2006. Initially the line will go to western Kazakhstan, south through Turkmenistan to Iran, then to Turkey and Europe. A shorter to-be-constructed 1,435 mm (4 ft 8+1⁄2 in) link from Kazakhstan is considered going through Russia and either Belarus or Ukraine.

The Baghdad Railway connects Istanbul with Baghdad and finally Basra, a sea port at the Persian Gulf. When its construction started in the 1880s it was in those times a Transcontinental Railroad.

North America

United States

A transcontinental railroad in the United States is any continuous rail line connecting a location on the U.S. Pacific coast with one or more of the railroads of the nation's eastern trunk line rail systems operating between the Missouri or Mississippi Rivers and the U.S. Atlantic coast. The first concrete plan for a transcontinental railroad in the United States was presented to Congress by Asa Whitney in 1845.

A series of transcontinental railroads built over the last third of the 19th century created a nationwide transportation network that united the country by rail. The first of these, the 3,103 km (1,928 mi) "Pacific Railroad", was built by the Central Pacific Railroad and Union Pacific Railroad, as well as the Western Pacific Railroad (1862–1870), to link the San Francisco Bay at Alameda, California, with the nation's existing eastern railroad network at Omaha, Nebraska/Council Bluffs, Iowa—thereby creating the world's second transcontinental railroad when it was completed from Omaha to Alameda on September 6, 1869. Its construction was made possible by the US government under Pacific Railroad Acts of 1862, 1864, and 1867. Its original course was very close to current Interstate 80.

The first transcontinental railroad was the much shorter Panama Railroad of 1855, now part of the country of Panama.

The United States' first transcontinental railroad was built between 1863 and 1869 that connected the existing eastern U.S. rail network at Council Bluffs, Iowa, with the Pacific coast at the Oakland Long Wharf on San Francisco Bay. Its construction was considered to be one of the greatest American technological feats of the 19th century. Known as the "Pacific Railroad" when it opened, it served as a vital link for trade, commerce, and travel and opened up vast regions of the North American heartland for settlement. Much of the original route, especially on the Sierra grade west of Reno, Nevada, is currently used by Amtrak's California Zephyr, although many parts have been rerouted.

The resulting coast-to-coast railroad connection revolutionized the settlement and economy of the American West. It brought the western states and territories into alignment with the northern Union states and made transporting passengers and goods coast-to-coast considerably quicker, safer and less expensive. It replaced most of the far slower and more hazardous stagecoach lines and wagon trains. The number of emigrants taking the Oregon and California Trails declined dramatically. The sale of the railroad land grant lands and the transport provided for timber and crops led to the rapid settling of the "Great American Desert".

Canada

The completion of Canada's first transcontinental railway with the driving of the Last Spike at Craigellachie, British Columbia, on November 7, 1885, was an important milestone in Canadian history. Between 1881 and 1885, the Canadian Pacific Railway (CPR) completed a line that spanned from the port of Montreal to the Pacific coast, fulfilling a condition of British Columbia's 1871 entry into the Canadian Confederation. The City of Vancouver, incorporated in 1886, was designated the western terminus of the line. The CPR became the first transcontinental railway company in North America in 1889 after its International Railway of Maine opened, connecting CPR to the Atlantic coast.

The construction of a transcontinental railway strengthened the connection of British Columbia and the North-West Territories to the country they had recently joined, and acted as a bulwark against potential incursions by the United States.

Subsequently, two other transcontinental lines were built in Canada: the Canadian Northern Railway (CNoR) opened another line to the Pacific in 1915, and the combined Grand Trunk Pacific Railway (GTPR)/National Transcontinental Railway (NTR) system opened in 1917 following the completion of the Quebec Bridge, although its line to the Pacific opened in 1914. The CNoR, GTPR, and NTR were nationalized to form the Canadian National Railway, which currently is now Canada's largest transcontinental railway, with lines running all the way from the Pacific Coast to the Atlantic Coast.

South and Central America

There is activity to revive the connection between Valparaíso and Santiago in Chile and Mendoza, Argentina, through the Transandino project. Mendoza has an active connection to Buenos Aires. The old Transandino began in 1910 and ceased passenger service in 1978 and freight 4 years later. Technically a complete transcontinental link exists from Arica, Chile, to La Paz, Bolivia, to Buenos Aires, but this trans-Andean crossing is for freight only.

On December 6, 2017 the Brazilian President Michel Temer and his Bolivian counterpart Evo Morales signed an agreement for an Atlantic - Pacific railway. The construction will start in 2019 and will be finished in 2024. The new railway is planned to be 3750 km in length. There are two possible tracks in discussion: Both have an Atlantic end in Santos, Brazil but the Pacific ends are in Ilo and Matarani in Peru.

Another longer Transcontinental freight-only railroad linking Lima, Peru, to Rio de Janeiro, Brazil is under development.

Panama

The first railroad to directly connect two oceans (although not by crossing a broad "continental" land mass) was the Panama Canal Railway. Opened in 1855, this 77 km (48 mi) line was designated instead as an "inter-oceanic" railroad crossing Country at its narrowest point, the Isthmus of Panama, when that area was still part of Colombia. (Panama split off from Colombia in 1903 and became the independent Republic of Panama). By spanning the isthmus, the line thus became the first railroad to completely cross any part of the Americas and physically connect ports on the Atlantic and Pacific Oceans. Given the tropical rain forest environment, the terrain, and diseases such as malaria and cholera, its completion was a considerable engineering challenge. The construction took five years after ground was first broken for the line in May, 1850, cost eight million dollars, and required more than seven thousand workers drawn from "every quarter of the globe."

This railway was built to provide a shorter and more secure path between the United States' East and West Coasts. This need was mainly triggered by the California Gold Rush. Over the years the railway played a key role in the construction and the subsequent operation of the Panama Canal, due to its proximity to the canal. Currently, the railway operates under the private administration of the Panama Canal Railroad Company, and its upgraded capacity complements the cargo traffic through the Panama Canal.

Guatemala

A second Central American inter-oceanic railroad began operation in 1908 as a connection between Puerto San José and Puerto Barrios in Guatemala, but ceased passenger service to Puerto San José in 1989.

Costa Rica

A third Central American inter-oceanic railroad began operation in 1910 as a connection between Puntarenas and Limón in 1,067 mm (3 ft 6 in) gauge. It currently (2019) sees no passenger service.